+38 (050) 477 83 88
Briquetting of charcoal
Equipment for the production of wood-coal briquettes as an extrusion-briquetting press with thermosetting outlet die and performance from 500 to 1500 kg/hour!!! Special technology allows achieving high-quality and ecological purity of the finished product. Wood-coal briquettes are made by compressing a mixture of screenings, crushed into dust with a binder in the extrusion press, due to the high pressure in the cone compression chamber (about 2000 kg/cm2) and by heat treatment on the output. This allows us to produce high quality pellets in different shapes:
1. Round type «Nestro», with a diameter of 40 to 60 mm on request.
2. Octagonal or square type «Pini-Kay» from 50x50 to 63 x 63 with a hole in the middle.
Charcoal briquettes are an environmentally friendly product that is used for cooking grill, barbecue, etc., and it is an ideal fuel for barbecues, stoves, fireplaces, all types of furnaces for heating tents, greenhouses. Briquette charcoal is an indispensable tool for creating comfort in field conditions, at a picnic, fishing, hunting.
Not only wood charcoal dust can be used as the raw material for manufacturing briquettes on this press. Dust of fossil coal, peat, lignin, animal manure also can be briquetted.
|Pressing force||Up to 14 tons|
|Pressure compaction||250 kg/cm|
|Frequency of rotation of main screw||45 r/min|
|Frequency of rotation of pre-press screw||45 r/min|
|Dimensions, mm||2500 × 1800 × 2100|
|Drive-motor: Power||22 kW|
|Thermosetting die power||2 kW|
|Parameters of obtained briquettes: